702T Serial Input Transmitter
Transmits control instructions or
other data from serial output devices such as personal computers, PLC's,
panel meters, embedded controllers, etc. to any Isaacs receiver for remote data
acquisition or remote relay control. Packaged
in a NEMA 4X enclosure. Uses 12 VDC power.
771T Analog Input Transmitter
Used with Westcon data acquisition modules, the
771T has multi-point analog and digital capability. Up to seven data
acquisition modules can be hardwired to a single 771T at one location. The data is sent digitally
from the transmitter to receivers that can either give the information directly to a computer via
the COM port, or convert it back into analog and digital outputs via data output modules.
Packaged in a 4.5" diameter by 11" long water-resistant container with a 1" NPT
fitting on the bottom for easy installation. Uses 12 VDC power.
737R Serial Output
Receiver
Converts radio information into serial data that is input directly
into a computer's COM port. The 737R can listen to up to 256 Isaacs SmartData
and/or SmartSwitch transmitters for monitoring processes and data logging. Uses 12 VDC power.
775R Analog Output Receiver
Used with Westcon data acquisition modules, the
775R converts radio information back into real world analog and digital
outputs. The 775R receiver can support up to fifteen data output modules at one location.
Packaged in a 4.5" diameter by 13" long water-resistant container with a 1" NPT
fitting on the bottom for easy installation. Uses 12 VDC power.
|